Data Sheet for Product

SQM5… Reversing Actuators Technical Instructions
Document No. 155-517P25
May 27, 2009
Siemens Industry, Inc. Page 21
AGA56.41/42/43
Circuit Board
Installation,
Continued
Re-install the actuator motor capacitor.
See Figure 20.
Gently guide the terminal section into the
support slots and slide the terminal
board downward until both supports
snap into place. Ensure that the four
brown wires and the flat white
connector cable which connect the two
circuit boards are positioned correctly
in their respective corners allowing the
board to freely slide into place without
pinching either wire. See Figure 21.
Connect the bundled blue, black and brown
potentiometer wires to the terminal
block located on the ASZ…
potentiometer circuit board. See
Potentiometer Installation.
Figure 20.
Figure 21.