Installation Instructions

Installation Instructions
Document No. 129-447
June 4, 2012
ASK39.1 Weather Shield
Information in this publication is based on current specifications. The company reserves the right to make changes in specifications and models as
design improvements are introduced. Flowrite is a registered trademark of Siemens Industry, Inc. Other product or company names mentioned
herein may be the trademarks of their respective owners. © 2012 Siemens Industry, Inc.
Siemens Industry, Inc.
Building Technologies Division
1000 Deerfield Parkway
Buffalo Grove, IL 60089
USA
+ 1 847-215-1000
Your feedback is important to us. If you have
comments about this document, please send them
to [e-mail]
Product Description
The ASK39.1 Weather Shield protects the actuator
when installed outdoors. Proper use of the weather
shield provides NEMA 3R protection. The cover is
easy to install; all necessary hardware is included in
the kit.
Product Number
ASK39.1
Contents
• ASK39.1 Weather Shield
• (2) UV-resistant cable ties
Expected Installation Time
5 minutes
Prerequisites
None
Mounting Positions
Figure 1. Acceptable Outdoor Mounting Positions with
Weather Shield.
Installation
Installation Notes
• To protect the actuator when used outdoors, the
weather shield must always be used.
• The manual adjuster cannot be used when the
weather shield is mounted.
Step 1.
Step 2.
The installation is complete.
References
Technical Instructions:
Flowrite 599 Series 155-506
SAX Electronic Valve Actuator Proportional Control
Flowrite 599 Series 155-507
SAX Electronic Valve Actuator 3-position (floating)
Control
Installation Instructions:
SAX Electronic Valve Actuator 129-561
Document No. 129-447
Printed in the USA
Page 1 of 1