Fire Detection System Planning Guide

Parameterization, Flash programming
59
Siemens Building Technologies 007836_a_en_--.doc
Fire & Security Products 03.2004
26 Parameterization, Flash programming
 Parameters are set for the FC700A fire detection system via the maintenance
PC by means of the software tool set 'SWE700A'.
 Online-Help text
Flash programming is only relevant if B3Q700 is used as replacement for FC700A
 New software is programmed by means of the 'Flash Tool' software. For the
modules B3Q700 the application software is now loaded into the Flash ROM via
the maintenance PC by means of the 'Flash Tool' software.
 Details see Online-Help in SWE700A
E3M...
B3D021
Modem box
RS232
FC
Maintenance PC with
'SWE700A' + 'FlashTool'
software
I-Bus
C-Bus
ST2
B3Q700 (FT700A)
Control unit
ST2
- for flash programming new application software
- download all system data
B3Q700 (FC700A)
Control terminal
26.1 Functions
– Load new application software (Flash) if necessary
– Prepare/supplement structure of the system
– Define user functions (system-specific)
– Specify/correct user text
– Detector localization
– Data transfer of user functions to control unit
26.2 Modules
Component Order-No. Description Notes
B3D021 505259 Modem box for SWE700A (DUAL RS232 ITF) Complete with flat cable 20 conductors,
L=0.2m
- 505330 Flat cable L=0,2m As spare part
M3C700 A5Q00004798 USB Dongle Key for SWE700A