Fire Detection System Planning Guide

Printer interface
51
Siemens Building Technologies 007836_a_en_--.doc
Fire & Security Products 03.2004
21 Printer interface
21.1 Features
 Provided with station types FC, FT
 Designed for commercially available printer with ISO-Latin1 or EPSON character
set
 Always allocated to all existing AREAS for the station used
 The printer can be individually switched on/off via operating terminal
 The event memory can be printed only if the printer is connected to a station FC
or FT
21.2 Application variant FT
B3Q700
in cabinet H26/H28
I-Bus
E3I020
RS232
FT
F20A020
ST1
ST2
to printe
r
max.1000m
F20A020
ST2
E3I020
Z1B020
B3Q700
C-Bus
ST2
21.3 Application variant FC
I-Bus
E3I020
RS232
C-Bus
FC
B3Q700
ST2
F20A140
ST1
X2
E3I020
F20A140
Z1K030
to printer
Housing control unit
max.1000m
B3Q700
21.4 Modules
Component Order-No. Description Notes
E3I020 460239 RS232 module Level adaptation HCMOS -> RS232
Z1B020 475907 Mounting accessories To mount E3I020 at the rear of B3Q700 (FT)
F20A020 476317 Flat cable 'Micro' 20 conductors, 0.165m
Z1K030 484231 Terminal block with p.c.b. Holder To mount E3I020 on the module space Pos.27
F20A140 496863 Flat cable 'Micro' 20 conductors, 0.650m