Operating instructions

System overview
9
Siemens Building Technologies 007995_a_en_--.doc
Fire & Security Products 04.2004
3.2 System configuration
Each fire detection system is configured individually. The configuration has an in-
fluence on the operation. The table below shows the configuration of your fire de-
tection system.
Parameters Functions and configuration
Operating access  via password
 via key switch
Remote transmission of alarms  yes
 no
Alarm sequence involving present staff  yes
 no
Switchover from 'Manned' to 'Unmanned'  automatic
 manual
automatic switchover time from 'Manned'
to ''Unmanned''
 indicate
 do not indicate
1. automatic switchover time from
'Manned' to ''Unmanned''
 18:00
 _____________
2. automatic switchover time from
'Manned' to ''Unmanned''
 not activated
 _____________
Delay period V1 ____ minutes
Delay period V2 ____ minutes
Switchover
summer time / winter time
 automatic
 manual
Remote transmission of faults  yes
 no
Function Evacuate  activated
 not activated
Access to Acknowledge  always possible
 only with password/key switch
Faults must be reset  yes
 no
Faults are always immediately transmitted
to the receiving station
 yes
 no
Manual call points in mixed detector
zones trigger alarm also when the detec-
tor zone is switched off
 yes
 no
Maximum operating time without mains
supply
______ h
Building plan handed over  on: __________
by: _________
Tab. 1 System configuration