Operating instructions

Operation

Siemens Building Technologies 007995_a_en_--.doc

Fire & Security Products 04.2004

5.5 Activating an evacuation

Overview

It is possible to activate an evacuation without an alarm being triggered by a detec-

tor. In this case no alarm message is transmitted to the fire brigade.

Procedure

To activate an evacuation, please proceed as follows:

1. Enable the operating level 2 (password or key).

2. Press the key 'Evacuation'.

 The LED 'Evacuation' lights up.

 The fire alarm devices (e.g. horns) are activated

3. To cancel the evacuation, press the key 'Evacuation' again.

 The LED 'Evacuation' no longer lights up.

 The fire alarm devices (e.g. horns) are deactivated

 The control unit is in normal operating condition again.