User Manual

Configuration
32
Building Technologies A6V10265083_b_en_NL
Fire Safety & Security Products 04.2010
8.2 Programming steps
1234
4
3
2
1
7
3
2
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
1
4 5
6
9 9 9 9
4
The selected programming steps are indicated at display module (4). The setting of
an option can be selected with the zone keys (6) and is indicated with the corre-
sponding red and yellow zone LED (5).
Select a programming step
 press key (3) to move upwards
 press key (2) to move downwards
Basic programming steps
LED STEP Define function
1 Timer V1
2 Timer V2
3 Processing of zone Alarm (zone type)
4 LED activation mode
 LED Remote transmission
 LED Alarm
 LED System part disabled mode manned
 Resound or not on new alarm
5 Activation mode of control lines 1 - 6
6 Measures against false alarms
 alarm verification
 zone disabled in mode manned
7 Control lines on Alarm
on
8 Special zone parameters
 behavior on immediate Alarm after Reset
 function of zone control outputs
9 Not used
10 Detector line evaluation on line short or line break
11 Cross-zoning
12 Access code (password)
 operating access
13 Special PMI parameters
 reminder beep on fault and system part disabled
 Fault messages to be Reset
 Suppress battery fault
14 Not used
15 Special parameters
 external Acknowledge and Reset
 zones with special disabling procedure
 Remote transmission on operating access
 all zones with option 1 in step 3 react like option 4
flashing
16 Programmable control input
Do not assign functions cross zoning (step 11) and alarm verification (step 6) simultaneously to the
same zone!