User Manual

Function and design

Building Technologies A6V10265083_b_en_NL

Fire Safety & Security Products 04.2010

Driver outputs Function / Application Load / rating Remarks

Mode manned active if system is in mode manned

Alarm 1 active on Alarm 0, 1 (inactive on Alarm 2)

blocked with controls disabled

Alarm 2 active on Alarm 2 until Reset

blocked with controls disabled

Disable active if any part of the system is disabled

Fault active on Fault until restored

Alarm 1/2 active on Alarm 0, 1 and Alarm 2 until Reset

- blocked with controls disabled

Zone 1 - 8 Active on zone alarm, or zone fault, switched off or test

blocked with controls disabled

 see Step 8, special zone parameters

max. 40mA/24V for internal and external use

5.2.2 Power supply

3.15 AT

Mains 230 VAC