User Manual
Time pressure, changes in plans
and inaccessible installations are
all part of the daily routine on
building sites. That is why Siemens
developed the Intelligent Valve. In
every project phase, it makes your
work easier, saves you time, and
guarantees both room comfort and
maximum energy efficiency.
Snap! And the parameters
are up-to-date
Connect to the Intelligent Valve as
you like: Use either the free ABT Go
app via wireless LAN, the ABT Site
via BACnet/IP, or simply connect from
your office via Building Operator, the
cloud application from Siemens. As
soon as the digital twin is created in
the Building Operator: you can access
parameters, check settings, and adjust
them if necessary – at any time and
from anywhere. There is no need to
coordinate device access with other
building services on site – the digital
twin updates itself each time you
make an adjustment.
Snap! And commissioning is
automatic
Take advantage of the wireless LAN
connection for commissioning. Down-
load the twin’s datasets from the ABT
Site to your ABT Go app. Then load it
via wireless LAN to each valve. Done!
The seamless and easy integration
with Desigo
TM
from Siemens saves you
even more time.
Snap! And everything is in balance
Rely on automatic hydronic balancing
as you would with a PICV. With the
Intelligent Valve, you don’t need
flow-regulating valves, balancing
valves or complicated hydronic calcu-
lations. Thanks to this self-optimizing
dynamic valve, the HVAC system is
automatically balanced at all times.
What’s more, you can check this at
any time with the Building Operator.
Snap! And all the valves are tested
Start the flow test by pressing the
service button or using the ABT Go
app. The test results are available
directly via wireless LAN on the app.
Intelligent Valve –
makes commissioning
a snap
The self-optimizing dynamic valve
with cloud connection
siemens.com/intelligentvalve
,QWHOOLJHQW
'HYLFHVE\
6LHPHQV