User Manual
Time pressure, changes in plans
and interdependencies are all part
of the daily routine when planning
HVAC systems. That is why Siemens
developed the Intelligent Valve.
In every project phase, it makes your
work easier, saves you time, and
guarantees both room comfort and
maximum energy efficiency.
Snap! And it’s set up
Don’t worry if the facade or insulation
changes over the course of the project.
With the Intelligent Valve, you can
check and adjust the presetting at any
time via remote access. Values are
always up-to-date and stored in the
digital twin in Building Operator, the
cloud application from Siemens.
Snap! And everything’s in balance
Forget complicated hydronic
calculations. The Intelligent Valve
continuously measures the flow rate
electronically and easily balances
fluctuations in pressure. There is no
need for time-consuming calculations:
All you have to do is determine the
maximum volumetric flow rate.
What’s more, the dynamically balanc-
ing system is intrinsically energy
efficient and ensures the greatest
possible room comfort.
Snap! And it’s approved
Regardless of how many parties are
working on the project, you’ll always
maintain a clear overview – because
the Building Operator will always
show you the latest valve status. You
can check and verify values as well as
the hydronic balancing and energy
efficiency at any time.
Snap! And the heat exchanger’s
optimized
Say goodbye to manual adjustments.
The Intelligent Valve optimizes the
heat exchanger. It measures the
temperature, flow rate and output to
determine whether the valve characte-
ristic is in line with the heat exchanger.
If it isn’t, the valve adapts the valve
characteristic to the heat exchanger’s
output characteristic.
Intelligent Valve –
makes planning a snap
The self-optimizing dynamic valve
with cloud connection
siemens.com/intelligentvalve
,QWHOOLJHQW
'HYLFHVE\
6LHPHQV