User guide

ManualsBrandsSiemens ManualsComputer equipmentERTEC EB 200

List of Figures

Figure 1: PROFINET IO Device with EB 200 in a Minimum Configuration ............................................................ 10

Figure 2: EB 200 Evaluation Board Imported in hardware catalog of SIMATIC Manager...................................... 11

Figure 3: EB 200 Evaluation Board Imported in hardware catalog of NCM PC ..................................................... 11

Figure 4: Configuring a PROFINET Device with EB 200 in HW CONFIG ............................................................. 12

Figure 5: Identifying the MAC and IP addresses of a Connected PNIO Controller................................................ 13

Figure 6: Entering the Configured IP Address and Subnet Mask and Assigning PNIO Controllers....................... 14

Figure 7: Downloading an Example Program to the S7 CPU ................................................................................ 15

Figure 8: Configuring a PROFINET Device with EB 200 in NCM PC CONFIG ..................................................... 16

Figure 9: Copying the Board Support Package for EB 200 to the Working Directory ............................................ 18

Figure 10: Copying the DevKit200 Example to the Project Directory of Tornado .................................................. 19

Figure 11: Configuring the FTP Server.................................................................................................................. 22

Figure 12: Overview of Connection for Downloading the Application Software for Device .................................... 23

Figure 13: EB 200 Power Up Message on Message Terminal .............................................................................. 23

Figure 14: Input Options for EB 200 on Message Terminal................................................................................... 24

Figure 15: Displaying Boot Parameters of EB 200 on Message Terminal............................................................. 24

Figure 16: Changing Boot Parameters of EB 200 on Message Terminal .............................................................. 25

Figure 17: EB 200 Messages following Successful Download and start of the device application ........................ 26

Figure 18: Directory Structure of the DK-ERTEC 200 PN IO V3.0 Development Kit CD....................................... 29

List of Tables

Table 1: Overview of PNIO Controller Blocks for Example Project........................................................................ 15

Table 2: Overview of Possible Problems when Commissioning Device ................................................................ 28

Table 3: Description of Directories......................................................................................................................... 29

Table 4: Files of the example application .............................................................................................................. 30

Technical data subject to change Version 3.0.0