User guide

Action 2
Change the MAC-Address as given on the label:
Input Byte 1 to Byte 6 of the MAC-Address.
After Input all 6 Bytes the data will be stored in the flash.
Following text is displayed on the terminal:
08- 00
00- 0E
06- 8C
02- 9B
01- A2
00- C6
New Ethernet Address is: 00:0e:8c:9b:a2:c6
[VxWorks Boot]:
From now on, download can take place via the FTP server, provided that the FTP server has been started and
EB200
is selected under menu item Security Æ User/Rights Security Dialog Æ User Name.
The following message is displayed during and after the program download to the terminal.
Bootinformation
Number of
loadable bytes
Start address of
SDRAM after FTP
download
Initialization of
PROFINET IO
Stack
End of
Initialization and
start of
application
auto-booting...
boot device : ifeast
unit number : 0
processor number : 0
host name : host
file name : vxworks.stripped
inet on ethernet (e) : 192.168.10.2
host inet (h) : 192.168.10.1
user (u) : eb200
ftp password (pw) : eb200
flags (f) : 0x0
Attached TCP/IP interface to ifeast0.
Warning: no netmask specified.
Attaching network interface lo0... done.
Loading... 3276624
Starting at 0x1000...
Attached TCP/IP interface to ifeast unit 0
Adding 6497 symbols for standalone.
sysclk-rate pre = 100
sysclk-rate after = 100
NOTE: PackId 99, ModId 0 Line 193 Device 1
Versions: Driver(1/0) DLL(1/0)NOTE: PackId 99, ModId 0 Line 227 Device 1
cp_nr(0) getting info...NOTE: PackId 99, ModId 0 Line 343 Device 1
cp_nr(0) cp_ident_string()NOTE: PackId 99, ModId 0 Line 364 Device 1
SDMem 0x0x3800000 Size=0x800000NOTE: PackId 99, ModId 0 Line 365 Device 1
SharedMem 0x0x0 Size=0x0NOTE: PackId 99, ModId 0 Line 366 Device 1
SharedMem PhysicalAddress 0x0x0scheduling rate is 100 ticks per second
Initial Performance finished, value = 450000
***Bsp_nv_data_restore:NvDataType=0***
***Bsp_nv_data_restore:NvDataType=0:Data from Flash***
***Bsp_nv_data_restore:NvDataType=1***
Bsp_nv_data_restore:NvDataType=1:Version not ok
NOTE: PackId 99, ModId 0 Line 385 Device 1
cp_nr(0) initializing...ifAddrSet 0.0.0.0:0.0.0.0
link port1: Status=2, Speed=0, Mode=0
link port2: Status=2, Speed=0, Mode=0
start MIB2 support for PROFINET IO....
***Bsp_nv_data_restore:NvDataType=0***
***Bsp_nv_data_restore:NvDataType=0:Data from Flash***
***Bsp_nv_data_memfree***
***Bsp_nv_data_restore:NvDataType=2***
***Bsp_nv_data_restore:NvDataType=2:Data from Flash***
##REMA SHADOW MEM RESTORE
***Bsp_nv_data_memfree***
PNIO DEVKIT Version 3. 0. 0. 0
Figure 17: EB 200 Messages following Successful Download and start of the device application
Copyright © Siemens AG 2008. All rights reserved. 26 DK_ERTEC200_PNIO_Description
Technical data subject to change Version 3.0.0