User guide

[VxWorks Boot]: ^c

'.' = clear field; '-' = go to previous field; ^D = quit

boot device : ifeast0

processor number : 0

host name : xena

file name : vxWorks.st vxworks.stripped

inet on ethernet (e) : 192.168.0.9 192.168.10.2

inet on backplane (b):

host inet (h) : 192.168.0.66 192.168.10.1

gateway inet (g) :

user (u) : boot eb200

ftp password (pw) (blank = use rsh): boot eb200

flags (f) : 0x0 0x8

target name (tn) : ertec200sk

startup script (s) :

other (o) :

Figure 16: Changing Boot Parameters of EB 200 on Message Terminal

Modified parameters are stored in the Flash memory and can be displayed again with p.

Adjust MAC-Address

In delivery state a Default-MAC-Address is stored in the flash of the EB200. This MAC-Address is the same on all

EB200. A label with a unique MAC-Address is placed on the solder site of EB200 near the debug port (X5).

This unique MAC-Address must be stored in the flash of EB200. Make following actions:

Change MAC-Address

Action 1

Press the button

“N”

Following text is displayed on the terminal:

[VxWorks Boot]: N

Current Ethernet Address is: 08:00:06:02:01:00

Modify all 6 bytes (board unique portion) of Ethernet Address.

The first 3 bytes are manufacturer's default address block.

08- 08

00- 00

06- 06

02- 02

01- 01

00- 00

08-

Technical data subject to change Version 3.0.0