User guide

The ? character is used to display a list of all possible inputs
[VxWorks Boot]: ?
? - print this list
@ - boot (load and go)
p - print boot params
c - change boot params
l - load boot file
g adrs - go to adrs
d adrs[,n] - display memory
m adrs - modify memory
f adrs, nbytes, value - fill memory
t adrs, adrs, nbytes - copy memory
e - print fatal exception
v - print boot logo with version
n netif - print network interface device address
N - set ethernet address
$dev(0,procnum)host:/file h=# e=# b=# g=# u=usr [pw=passwd] f=#
tn=targetname s=script o=other
Boot flags:
0x02 - load local system symbols
0x04 - don't autoboot
0x08 - quick autoboot (no countdown)
0x20 - disable login security
0x40 - use bootp to get boot parameters
0x80 - use tftp to get boot image
0x100 - use proxy arp
available boot devices:Enhanced Network Devices
ifeast0
Figure 14: Input Options for EB 200 on Message Terminal
If the evaluation board is switched on for the first time, all boot parameters have default settings.
These can be displayed on the terminal with p.
[VxWorks Boot]: P:
boot device : ifeast
unit number : 0
processor number : 0
host name : xena
file name : vxWorks.st
inet on ethernet (e) : 192.168.0.9
host inet (h) : 192.168.0.66
user (u) : boot
ftp password (pw) : boot
flags (f) : 0x0
target name (tn) : ertec200sk
Figure 15: Displaying Boot Parameters of EB 200 on Message Terminal
Various boot parameters must be changed to enable downloading of data from the FTP server and starting of the
PNIO device in the system. This is done with c on the terminal. All parameter lines that should not be changed
are not changed when the return key is pressed. Changes to the parameter lines are made directly in the line.
Copyright © Siemens AG 2008. All rights reserved. 24 DK_ERTEC200_PNIO_Description
Technical data subject to change Version 3.0.0