User guide

2.8.7 Downloading User Software to the Evaluation Board
The following connections must be made:
¾ Connect power supply to evaluation board
¾ Connect hyperterminal to the message display
interface and start it (2).
¾ Connect the Ethernet interface of the PC with installed FTP server and the compiled software to the
debug Ethernet port of the EB 200. Set TCP/IP address 192.168.10.1 on the Ethernet port of the PC (3).
¾ Start the FTP server.
(2) Terminal (PC-COMx) for
Messa
g
e Out
p
ut
(1) Connect power
su
pp
l
y
(3) Connect FTP server of
the PC to EB200 via
Ethernet
Figure 12: Overview of Connection for Downloading the Application Software for Device
2.8.7.1 Displaying Messages on the Terminal
The following message are displayed on the terminal when the evaluation board is powered up.
VxWorks System Boot
Copyright 1984-2002 Wind River Systems, Inc.
CPU: ERTEC200sk (Siemens A&D)
Version: VxWorks5.5.1
BSP version: 1.2/5
Creation date: Mar 5 2007, 12:23:46
Figure 13: EB 200 Power Up Message on Message Terminal
Auto-boot is stopped when a key is pressed within 2 seconds.
Copyright © Siemens AG 2008. All rights reserved. 23 DK_ERTEC200_PNIO_Description
Technical data subject to change Version 3.0.0