User guide

2.8.6 Preparing to Commission the Complete System
Before the system can be commissioned, an FTP server and a terminal program must be set up and configured.
To download the PROFINET IO device application to the development board, an FTP server that provides access
to the file with the compiled complete system must be installed.
The development board includes a standard boot loader in the Flash that downloads the complete system to the
onboard RAM via the FTP following a board reset. Our example uses the FTP server wftpd32, which is part of the
Tornado 2.2 software.
2.8.6.1 Configuring the FTP Server
Start the FTP server from the menu bar.
The Security button is activated to configure the FTP server. The following settings must be specified in all three
menus.
User/Rights Security Dialog
The home directory is: C:\TORNADO2.2\TARGET\PROJ\devkit_eb200\DEFAULT
Click New User and enter
User Name
eb200
Enter the home directory of Tornado.
In this example: C:\TORNADO2.2\TARGET\PROJ\
devkit
_
eb200
\
DEFAULT
A
fter clicking OK, “Change Password”
appears.
Enter eb200 in both windows and click OK to
close.
Copyright © Siemens AG 2008. All rights reserved. 21 DK_ERTEC200_PNIO_Description
Technical data subject to change Version 3.0.0