Technical data

Copyright © Siemens AG 2013. All rights reserved. 29 EB 200P Manual
Technical data subject to change Version 1.0.1
6.1 PCI Express x1 Interface
In the following table pin out of PCIe x1 connector is described.
Connector name: X60
Connector type: 36-pin PCB direct connector
Pin no.
Side B Side A
Name Description Name Description
1
+12V
12 V power
PRSNT1#
Hot
-
Plug presence detect
2 +12V 12 V power +12V 12 V power
3 RSVD Reserved +12V 12 V power
4 GND Ground GND Ground
5 SMCLK SMBus clock JTAG2 TCK
6
SMDAT
SMBus data
JTAG3
TDI
7 GND Ground JTAG4 TDO
8 +3.3V 3.3 V power JTAG5 TMS
9 JTAG1 TRST# +3.3V 3.3 V power
10 3.3V aux 3.3 V auxiliary power +3.3V 3.3 V power
11 WAKE# Link reactivation PERST# Reset
12 RSVD Reserved GND Ground
13 GND Ground REFCLK+ Reference clock P
14 PETp0 Tx P Lane 0 REFCLK- Reference clock N
15 PETn0 Tx N Lane 0 GND Ground
16 GND Ground PERp0 Rx P Lane 0
17 PRSNT2 Hot-Plug presence detect PERn0 Rx N Lane 0
18 GND Ground GND Ground
Table 18 Pin assignment of PCIe interface
6.2 External DC Power Supply
In standalone mode, the EB 200P must be supplied with an external regulated 24 VDC/1,5 A power supply.
Connector name: X10
Connector type: 2-pin industry type
Pin No. Signal Name Function
1 DC Potential 24 V
2 M Ground 24 V
Table 19 Pin assignment of external power supply connector