Technical data

Copyright © Siemens AG 2013. All rights reserved. 28 EB 200P Manual
Technical data subject to change Version 1.0.1
6 Connectors of the EB 200P
The following connectors are available on the EB 200P for the interface connection to external components and
systems.
o PCI Express Interface (X60 36-pin PCB direct connector)
o External DC power supply (X10 2-pin industry plug-in)
o Ethernet and TAP interface (X1 RJ45 socket with integrated magnetics + LEDs)
o Sync connector (X2 BNC connector)
o USB UART (X11 USB Mini-B connector)
o EMC interface (X80/81 38-pin Mictor connectors)
o GPIO [15 to 0] (X50 2x10-pin plug connector)
o JTAG connector for FPGA (X32 2x5-pin plug connector)
o GPIO [95 to 0] (X20-22 38-pin Mictor connectors)
o Trace connector for ETM of ARM926EJ-S (X30 38-pin Mictor connector)
o JTAG connector for ICE or debugger (X31 2x10-pin plug connector)
o Configuration pins for ERTEC 200P (X40/41 2x10 + 2x5-pin plug connector)
o Configuration pins for onboard circuits (X42/43 2x10 + 2x5-pin plug connector)
The following figure is a schematic representation of the connectors and jumper connectors, intended to help the user
quickly find the required interfaces
Figure 5 Connector Positions on the EB 200P