Technical data

Technical data subject to change Version 1.0.1

GPIO(27) - - - - - - -

GPIO(28) - - - - - - -

GPIO(29) - - - - - - -

GPIO(30)

GPIO(31) - - - - - - -

Table 8 Debug circuits interconnections on EB 200P

Note: *1 Configured by jumper at one time can be connected only input or output

*2 Assembly option, shared pins with BNC connector, if assembled BNC must not be used or connected

*3 UART means connection via USB - Serial convertor

*4 DBACK and DBGRQ can be configured by jumper only on TRACE connector, on the JTAG connector

are connected always