Technical data

1.2 Structure of the EB 200

The EB 200 is implemented in the form of a PCI card. The PCI interface is used only for module tests. In standard

configuration the EB 200 is operated as a stand-alone module. The EB 200 is supplied by means of an external plug-

in power supply (part of the development kit). For debugging the Amontec JTAG debugger including usb cable (both

also part of the development kit) can be plugged onto the EB200 as shown in the following picture.

1.3 Features of the EB 200

In addition to the ERTEC 200 with its integrated function groups, the following elements are available on the EB 200:

 PC front panel element with

o 2 RJ45 sockets with integrated magnetics

o 2 LEDs Link and Activity per RJ45 socket  Optional LED display Speed and Duplex

o 2 LEDs for additional status indicators

o External DC power supply in stand-alone mode

 Flash memory 4 Mbytes

 Flash memory 512 Kbytes, socketed PLCC32

 SDRAM 64 Mbytes

 SRAM 8 Mbytes

 SPI Data Flash and EPROM

 Debug and trace interface for ARM946ES-µP

 RS232 interface for booting, debugging, and monitoring

 Configuration and boot modes can be set via jumpers

 Various operating modes of the EB 200 can be set via jumpers

 Various connectors for external wiring

Technical data subject to change Version 1.1.4