Technical data

The table below presents the display elements and their functions.

LED Color Function

Link Port1 (GPIO 4) Green On = Port 1 has link

Activity Port1 (GPIO 6) Yellow On (80 ms) = Message frame on Port 1 received or transmitted

Link Port2 (GPIO 5) Green On = Port 2 has link

Activity Port2 (GPIO 7) Yellow On (80 ms) = Message frame on Port 2 received or transmitted

Fault (GPIO 2) Red On = Bus fault of ERTEC200 starter kit

Sync (GPIO 3) Green On = ERTEC200 starter kit has been synchronized to the network clock

Table 29: Function of LEDs on Front Panel of the EB 200

The display LEDs of the RJ45 sockets are directly connected to the LED outputs of the PHYs integrated in the ERTEC

200. Optionally, these LED outputs can be converted to a GPIO-alternative function. In this way, software can be used

to control the LED activation.

Technical data subject to change Version 1.1.4