Technical data

Table 27: Connector X10 for Boot Settings and Some Configuration Settings

8.2 System/Configuration Connector X11

Connector X11 is used to specify the remaining configuration modes and various system functions on the EB 200 (for

a description of system and configuration modes, refer to Section 2.1.2).

Con

nector name: X11

Connector type: 2x8 pin male connector

Pin Signal Name Type Meaning

1 M

2 CONFIG[5]

3 M

4 CONFIG[6]

5 M

6 SPI_CONFIG

7 M

8 SYS_CONFIG[0]

9 M

10 SYS_CONFIG[1]

11 M

12 SYS_CONFIG[2]

13 M

14 SYS_CONFIG[3]

15 M

16 SYS_CONFIG[4]

Table 28: Connector X11 for Configuration and System Settings

Technical data subject to change Version 1.1.4