Technical data
7.1 PCI Interface
The PCI interface corresponds to the standardized PCI interface. The PCB direct connector has the 5V universal card
characteristic. The PCI interface is used only for the function test of the EB 200.
Connector name: X1
Connector type: 124-pin PCB direct connector
Pin No. Name Function Pin No. Name Function
B1 -12 V Supply A1 TRST_N JTAG
B2 TCK JTAG A2 +12 V Supply
B3 M Ground A3 TMS JTAG
B4 TDO JTAG A4 TDI JTAG
B5 +5 V Supply A5 +5 V Supply
B6 +5 V Supply A6 INTA_N Interrupt
B7 INTB_N Interrupt A7 INTC_N Interrupt
B8 INTD_N Interrupt A8 +5 V Supply
B9 PRSNT1_N - A9 - Reserved
B10 - Reserved A10 +Vio I/O supply
B11 PRSNT2_N - A11 - Reserved
B12 - Key A12 - Key
B13 - Key A13 - Key
B14 - Reserved A14 3.3 Vaux Auxiliary power
B15 M Ground A15 RST_N PCI reset
B16 CLK PCI clock A16 +Vio I/O supply
B17 M Ground A17 GNT_N Grant to master
B18 REQ_N Request from master A18 M Ground
B19 +Vio I/O supply A19 PME_N Interrupt power management
B20 AD[31] Address/data A20 AD[30] Address/data
B21 AD[29] Address/data A21 +3.3 V Supply
B22 M Ground A22 AD[28] Address/data
B23 AD[27] Address/data A23 AD[26] Address/data
B24 AD[25] Address/data A24 M Ground
B25 +3.3 V Supply A25 AD[24] Address/data
B26 CBE_N[3] Command/byte enable A26 IDSEL CS for Config
B27 AD[23] Address/data A27 +3.3 V Supply
B28 M Ground A28 AD[22] Address/data
B29 AD[21] Address/data A29 AD[20] Address/data
B30 AD[19] Address/data A30 M Ground
B31 +3.3 V Supply A31 AD[18] Address/data
B32 AD[17] Address/data A32 AD[16] Address/data
B33 CBE_N[2] Command/byte enable A33 +3.3 V Supply
B34 M Ground A34 FRAME_N PCI control
B35 IRDY_N Initiator Ready A35 M Ground
B36 +3.3 V Supply A36 TRDY_N Target ready
B37 DEVSEL_N Device select A37 M Ground
B38 M Ground A38 STOP_N Stop signal
B39 LOCK_N Lock signal A39 +3.3 V Supply
B40 PERR_N Parity error A40 - Reserved
B41 +3.3 V Supply A41 - Reserved
B42 SERR_N System error A42 M Ground
B43 +3.3 V Supply A43 PAR Parity signal
B44 CBE_N[1] Command/byte enable A44 AD[15] Address/data
B45 AD[14] Address/data A45 +3.3 V Supply
B46 M Ground A46 AD[13] Address/data
B47 AD[12] Address/data A47 AD[11] Address/data
B48 AD[10] Address/data A48 M Ground
B49 M Ground A49 AD[09] Address/data
B50 - Key A50 - Key
Copyright © Siemens AG 2010. All rights reserved. 30 EB 200 Manual
Technical data subject to change Version 1.1.4