Technical data

7 Connectors of the EB 200
The following connectors are available on the EB 200 for the interface connection to external components and
systems.
o PCI Interface (X1 124-pin PCB direct connector)
o External DC power supply (X2 Mini-DC power jack 3.5/1.3 mm)
o 2 Ethernet downlink interface (X3,4 RJ45 socket with integrated magnetics + LEDs)
o Reserved (X6 3-pin Minitec connector)
o UART (X7 9-pin SubD connector)
o GPIO [15 to 0] (X20 2x10-pin plug connector)
o GPIO [31 to .16] (X21 2x10-pin plug connector)
o GPIO [44 to .32] (X22 2x8-pin plug connector)
o I/O bus (X30-32 each with 2x13-pin plug connector)
o Trace connector for ETM of ARM946E-S (X60 38-pin Mictor connector)
o JTAG connectors for ICE or debugger (X61 2x10-pin plug connector)
o Reserved (X62 2x5-pin plug connector)
o Reserved (X63 1x8-pin plug connector)
The following figure is a schematic representation of the connectors and jumper connectors, intended to help the user
quickly find the required interfaces
X6
X32 X31 X30
Figure 5: Connector Positions on the EB 200
Copyright © Siemens AG 2010. All rights reserved. 29 EB 200 Manual
Technical data subject to change Version 1.1.4