Technical data
1.5 Signal Function Description
ERTEC 200 Pin Description
The ERTEC 200 Ethernet communication block is available in a 304-pin FBGA package. The signal names of the
ERTEC 200 are described in this section.
1.5.1 GPIO 0 to 31 and Alternative Functions
Various signals are multiplexed on the same pin. These multiplexed signals can contain up to four different functions.
The alternative functions are assigned in GPIO registers GPIO_PORT_MODE_L and GPIO_PORT_MODE_H (see
Section 4.2.2). The table describes all signals with their different functions and associated pin numbers.
No. Signal
Name
Alternative
Function 1
Alternative
Function 2
Alternative
Function 3
I/O
(Reset)
Pull- PIN
No.
Comment
General Purpose I/O / I/O
1
GPIO0 P1-DUBLEX-
LED_N
B/O/(I) up D19 GPIO (interrupt-
capable) or PHY-LED
(O)
2
GPIO1 P2-DUBLEX-
LED_N
B/O/(I) up B20 GPIO (interrupt-
capable) or PHY-LED
(O)
3
GPIO2 P1-SPEED_N-
100LED
(TX/FX)
P1-SPEED-
10LED_N
B/O/O/(I) up D17 GPIO or PHY-LED (O)
4
GPIO3 P2-SPEED-
100LED_N
(TX/FX)
P2-SPEED-
10LED_N
B/O/O/(I) up B19 GPIO or PHY-LED (O)
5
GPIO4 P1-LINK-
LED_N
B/O/(I) up A19 GPIO or PHY-LED (O)
6
GPIO5 P2-LINK-
LED_N
B/O/(I) up D16 GPIO or PHY-LED (O)
7
GPIO6 P1-RX-LED_N P1-TX-LED_N P1-ACTIVE-
LED_N
B/O/O/O/(I) up B18 GPIO or PHY-LED (O)
8
GPIO7 P2-RX-LED_N P2-TX-LED_N P2-ACTIVE-
LED_N
B/O/O/O/(I) up D15 GPIO or PHY-LED (O)
9
GPIO8 UART-TXD B/O/(I) up B17 GPIO or UART (O)
10
GPIO9 UART-RXD B/I (I) up A17 GPIO or UART (I)
11
GPIO10 UART-DCD_N B/I (I) up B16 GPIO or UART (I)
12
GPIO11 UART-DSR_N B/I (I) up E16 GPIO or UART (I)
13
GPIO12 UART-CTS_N B/I (I) up A16 GPIO or UART (I)
14
GPIO13 Reserved B/O/(I) up B15 GPIO
15
GPIO14 DBGACK B/O/(I) up E15 GPIO or DEBUG (O)
16 GPIO15 WD_WDOUT0_
N
B/O/(I) up E14 GPIO or Watchdog (O)
17
GPIO16 SPI1_SSPCTL
OE
B/O/(I) up A13 GPIO or SPI1 (O)
18
GPIO17 SPI1_SSPOE B/O/(I) up F14 GPIO or SPI1 (O)
19
GPIO18 SPI1_SSPRXD B/I (I) up B12 GPIO or SPI1 (I)
20
GPIO19 SPI1_SSPTXD B/O/(I) up D13 GPIO or SPI1 (O)
21 GPIO20 SPI1_SCLKOU
T
B/O/(I) up D11 GPIO or SPI1 (O)
22 GPIO21 SPI1_SFRMOU
T
B/O/(I) up A11 GPIO or SPI1 (O)
Copyright © Siemens AG 2007. All rights reserved. 12 ERTEC 200 Manual
Technical data subject to change Version 1.1.0