User Manual

12 / 16
Siemens EMC manual – Activities module CM110901en_01
Building Technologies Creating and editing activities 13.07.2009
6 Creating and editing activities
6.1 Creating activities
Chapter 3.1 "Owners and users with responsibility" describes what user roles can
create activities.
To create an activity, select the "Create Activity" function.
The properties of the activity can be entered in the input mask.
Mandatory fields for user input are marked with an asterisk (*).
• Node selection: Activities must be assigned to a customer or node in the EMC
structure. All customers/nodes assigned to the user are available.
• Contract number/equipment number: These properties can be created in the
EMC country administrator function for customers. Depending on the
customer/node selection, the corresponding contract/equipment numbers are
provided for selection.
An activity cannot be saved until all mandatory fields have been filled in.
To enter comments and file attachments, select the corresponding tab on the right
side of the screen.
An activity is always created with the state "New". To then release the activity for
the work flow (by changing its state to "Open"), click on the corresponding function
on the top right margin of the screen in the working view.
Input mask
Important