User Manual

10 / 16
Siemens EMC manual – Activities module CM110901en_01
Building Technologies Operation 13.07.2009
5.2 Adapting views
The view can be adapted to suit the user's requirements. For example, numerous
filter and sorting options are provided. These settings can also be saved.
EMC distinguishes between standard views and user-defined views as follows:
• Standard views are provided by the system and vary according to the applicable
user role.
• User-defined views can be freely created and saved.
5.2.1 Standard views
The module provides standard views to provide for a prompt overview.
Filters and columns are already defined in the standard views.
The following standard views are available:
Name Owner Note
Owned by me Displays all activities added
by the current user.
The view is only displayed for operators.
Due this week Displays all activities that
have to be cleared by the
end of the current week.
The display varies according to the state
and assigned function of the user
(owner/responsible).
My tasks Displays all of the user's
activities to be processed.
The display varies according to the state
and assigned function of the user
(owner/responsible).
5.2.2 User-defined views
User-specific views can be defined and stored in the activities module. In this way,
for example, all activities for a specific customer or all activities in a particular state
can be quickly accessed.
To create or edit a user-defined view, select the "Create/Edit View" function.
In the second step, select the columns that are to be displayed on the interface.