User Manual
11 / 16
Siemens EMC manual – Events module CM110902en_01
Building Technologies Operation 02.08.2009
If a received alarm is acknowledged, accepted or edited, the user is automatically
accepted as the owner and the event card is removed from the stack for all other
users.
3.2 User rights
The Events module is only available to company users. The following user groups
have access to the application:
• Country administrators / deputies
• Operators
• Technicians
Other users can only present events by means of reports.
3.3 Adapting views
The view can be adapted to suit the user's requirements. For example, numerous
filter and sorting options are provided. These settings can also be saved.
EMC distinguishes between standard views and user-defined views as follows:
standard views are provided by the system and vary according to the applicable
user role;
user-defined views can be freely created and saved.
3.3.1 Standard views
The module provides standard views to quickly provide an overview.
Filters and columns are already defined in the standard views.
The following standard views are available:
Name Owner Remarks
Current events Shows all alarms in an alarm
state.
The Events module always starts
with this view.
My events Shows all alarms assigned to
the current user (owner).
—
Watched by me Displays all of the alarms
monitored by the user.
—