User Manual

4 / 14
Siemens EMC manual – Analysis module CM110903en_01
Building Technologies Documentation overview 16.08.2009
1 Documentation overview
1.1 Revision History
Version Date Changes Chapter Pages
1 16.08.2009 New document
1.2 Before you begin
1.2.1 Copyright
Reproduction and distribution of this document is only permitted with the express
permission of Siemens and only for authorized persons / enterprises with
appropriate technical expertise.
1.2.2 Quality assurance
This document was created with the greatest possible care and attention.
The contents of all documents are regularly reviewed.
All required corrections are incorporated into subsequent versions.
Modifications or corrections to the products described result in the modification
of these documents.
Ensure that you inform yourself of the current document status.
Should you notice unclear information while using these documents, or if you have
comments or feedback, please forward this to the product manager at your nearest
branch office. You can find the addresses of the local Siemens offices at
www.siemens.com/sbt
.
1.2.3 Document use / Request to read
Documentation that comes with our products (devices, applications, tools, etc.) or
is obtained separately must be carefully and thoroughly read prior to use.
We assume that the users of the products and documents have the appropriate
authorization and training, as well as the appropriate technical knowledge to be
able to use the products as intended.
Further information on the products and applications is available from:
The intranet (only for Siemens employees) at
https://workspace.sbt.siemens.com/content/00001123/default.aspx
your nearest Siemens office www.siemens.com/sbt or system supplier
the headquarters support team (fieldsupport-zug.ch.sbt@siemens.com), if no
local contact person is known.
Please note that, to the extent permissible by law, Siemens does not assume
any liability for damages resulting from non-observance or improper observance of
the above points.