Operation Manual

9
Powerboost function
The Powerboost function can be used to heat large amounts of
water more quickly than the power level
Š.
Use limitations
This function may be used for all hotplates, provided that the
other hotplate in the same group is not switched on (see
figure). Otherwise,
› and the power level will flash on the
selected hotplate display; the previously selected power level
will then be automatically set, without turning on the function.
How to activate
1. Select the desired power level.
2. Press the & symbol which controls the selected hotplate.
The
› indicator lights up.
The Powerboost function will have been activated.
How to deactivate
Press the & symbol. The indicator › will disappear and the
hotplate will return to the previously selected power level.
The Powerboost function will have been deactivated.
Note: In certain circumstances, the Powerboost function may
turn off automatically in order to protect the electronic
components inside the hob.
Time program function
This function may be used in two different ways:
■ to automatically switch off a hotplate
■ as a timer
Turning off a hotplate automatically
The zone turns off automatically once the selected time has
elapsed.
Program the cooking time.
1. Select the power level of the desired hotplate with the
appropriate control.
2. Press the 0 symbol. The Ú indicator on the hotplate lights
up.
‹‹ is displayed on the time program function display.
3. Press the + or - symbol. The basic setting appears:
+ symbol: 30 minutes.
- symbol: 10 minutes.
4. Press the + or - symbol until the required cooking time
appears.
After a few seconds, the cooking time begins to elapse.
Note: The same cooking time can be automatically
programmed for the all the hotplates. The programmed time
passes independently for each of the hotplates.
The Basic settings chapter provides information on
automatically programming the cooking time.
Changing or cancelling the time
Press the
0 symbol several times until the Ú indicator of the
required hotplate lights up. Change the cooking time using
the + or - symbols, or set to
‹‹.
Once the time has elapsed
The hotplate switches off. A beep sounds and in the time
program function display
‹‹ appears for 10 seconds.
The
Ú indicator on the hotplate lights up. Pressing the 0
symbol turns off the indicators and stops the beeping.
Notes
■ If a cooking time has been programmed for various zones,
the time program function display always shows the time of
the last hotplate whose power or setting has been adjusted.
■ Cooking times can be programmed for up to 99 minutes.
The timer
The timer can be set for periods of up to 99 minutes. It is
independent of the other settings. This function does not
automatically switch off a hotplate.
How to program
1. The timer can be selected in two different ways:
■ If you have selected the hotplate: press the 0 symbol
twice.
■ If you have not selected the hotplate: press the 0 symbol.
The
Ú indicator next to the W symbol lights up. ‹‹ is
displayed on the time program function display.
2. Press the + or - symbol. The basic setting appears.
+ symbol: 10 minutes.
- symbol: 5 minutes.
3. Set the desired time using the + or - symbols.
After a few seconds, the time will start to elapse.
Changing or cancelling the time
Press the
0 symbol various times until the Ú indicator next to
the
W symbol lights up. Change the time or set to ‹‹ with
the + or - symbols.
Once the time has elapsed
A warning signal sounds.
‹‹ is displayed on the time program
function display. After 10 seconds the indicators turn off.
Pressing the
0 symbol turns off the indicators and stops the
beeping.
*URXS









*URXS
*URXS
*URXS
 