Operation Manual

10
Automatic time limitation
If the hotplate remains in use for a long time and no changes
are made in the settings, the automatic time limitation function
is triggered.
The hotplate stops heating. The
”, ‰ symbol and the residual
heat indicator
œ/• flash alternately in the display.
The indicator goes out when any symbol is pressed. The
hotplate can now be reset.
When the automatic time function is used, it is governed by the
selected power level (from 1 to 10 hours).
Basic settings
The device has several basic settings. These settings may be
adapted to the user's individual needs.
Accessing the basic settings
The hob should be turned off.
1.Select power level 1 on the front left-hand hotplate.
2.Within the next 10 seconds, press and hold the ‚ symbol
for 4 seconds approximately.
In the display
™ and ‚ alternately light up and ‹ lights up as
a default setting.
3.Press the ‚ symbol several times until the required function
indicator appears.
4.Next select the desired setting using the + and - symbols.
5.Press the ‚ symbol again for approximately 4 seconds.
The settings will have been correctly saved.
Exit the basic settings without changing them
Switch off the hob and reset it.
Indicator Function
™‚
Childproof lock
‹ Deactivated.*
‚ Activated.
™ƒ
Audible signals
‹ Confirmation and error signals deactivated.
‚ Only error signal activated.
ƒ Only confirmation beep activated.
„ All signals activated.*
™†
Automatic programming of cooking time
‹ Turned off.*
‚-ŠŠ Automatic shut-off time
™‡
Duration of the time program function warning signal
‚ 10 seconds.*
ƒ 30 seconds.
„ 1 minute.
™‹
Return to default settings
‹ Personal settings.*
‚ Return to factory settings.
*Factory settings