Operation Manual

11
Childproof lock
The hob can be protected against being accidentally turned on,
to ensure that children do not switch on the hotplates.
Activating and deactivating the childproof
lock.
The range must be turned off.
To activate: press and hold the
# symbol for approx.
4 seconds. The
@ symbol lights up for 10 seconds. The
range is locked.
To deactivate: press and hold the
# symbol for approx.
4 seconds. The lock is now deactivated.
Childproof lock
With this function, the childproof lock automatically activates
when a hob is switched off.
Activating and deactivating
All of the relevant information on the automatic childproof lock
connection can be found in the Basic settings chapter.
Powerboost function
The Powerboost function can be used to heat large amounts of
water more quickly than the power level
Š.
Restrictions when using
This function is available on all hotplates, provided that no other
hotplate in the same group is operating, (see diagram).
Otherwise, the
› and Š symbols will flash on the display of the
selected hotplate; then the power level
Š is automatically set.
To activate
1. Select the power level Š.
2. Press the programming panel located above the @› symbol.
The function has been activated.
To turn off
Press the programming panel located above the @› symbol.
The Powerboost function has been deactivated.
Note: In certain circumstances, the Powerboost function may
turn off automatically in order to protect the electronic
components inside the hob.
Time programming function
This function may be used in two different ways:
■ to automatically switch off a hotplate.
■ as a timer.
A hotplate should switch off automatically
The hotplate switches off automatically after the time that is set
has elapsed.
Setting the cooking time
The hob must be switched on.
1. Select the hotplate and set the heat setting.
2. Touch the 0 symbol. The x indicator for the required
hotplate lights up.
‹‹ appears in the timer display.
3. Within the next 10 seconds, set the required cooking time in
the control panel. The possible presets from left to right are 1,
2, 3..... up to 10 minutes.
After a few seconds, the cooking time begins to elapse.
Note: The same cooking time can be automatically
programmed for the all the hotplates. The programmed time
passes independently for each of the hotplates.
The Basic settings chapter provides information on
automatically programming the cooking time.
Automatic programming
If the previous setting from 1 to 5 is pressed in the
programming zone, the cooking time is reduced by one minute.
If the previous setting from 6 to 10 is pressed in the
programming zone, the cooking time is increased by one
minute.





*URXS
*URXS
 