Operation Manual

10
Consisting of two independent zones
The flexible zone can be used normally as two independent
hotplates.
How to activate
See “adjusting the hotplate“ section.
As one hotplate
To use the entire hotplate with all individual zones.
How to activate
The hob must be switched on.
1.Place the cookware and press the þ symbol. The Nþ
indicator lights up.
The flexible zone has been activated.
2.Next, select the desired power level by turning the
corresponding settings disc for one of the two zones that
make up the flexible zone.
The power level lights up on the indicators for both hotplates.
The flexible zone is switched on.
Changing the power level
Change the power level by turning the control disc of one of the
two hotplates.
Adding more cookware
Press the
þ symbol. The new pan will be detected and the
previously selected power level will be maintained.
Note: If the pan on the hotplate that is switched on is moved or
removed, the hob will perform an automatic search and the
previously selected power level will be maintained.
To deactivate
Set to
‹ with the control disc.
Childproof lock
The hob can be protected against being accidentally turned on,
to ensure that children do not switch on the hotplates.
Activating and deactivating the childproof
lock.
The range must be turned off.
To activate: press and hold the
# symbol for approx. 4
seconds. The
@ symbol lights up for 10 seconds. The range
is locked.
To deactivate: press and hold the
# symbol for approx. 4
seconds. The lock is now deactivated.
Childproof lock
With this function, the childproof lock automatically activates
when a hob is switched off.
Activating and deactivating
All of the relevant information on the automatic childproof lock
connection can be found in the Basic settings chapter.
Powerboost function
The Powerboost function can be used to heat large amounts of
water more quickly than the power level
Š.
Restrictions when using
This function may be used for all hotplates, provided that the
other hotplate in the same group is not turned on. (See figure)
Otherwise, the
› and Š symbols will flash on the display of the
selected hotplate; then the power level
Š is automatically set
without the function being activated.
Note: The Powerboost function can be activated in the flexible
zone when used as a single hotplate. In this case, place the
pan in the centre as shown in the Flexible zone section.
To activate
1.Select the desired power level.
2.Press the ›symbol.
The function has been activated.
To deactivate
Select a new power level using the control disc. The
Powerboost function has been deactivated.
Note: In certain circumstances, the Powerboost function may
turn off automatically in order to protect the electronic
components inside the hob.








*URXS
*URXS
*URXS
*URXS