Operation Manual
7
Familiarise yourself with the appliance
These instructions for use are applicable to other hobs. On
page 2 an overview of the models is provided, along with
information on measurements.
The control panel
Control surfaces
Pressing a symbol activates its corresponding function.
Notes
■ Always keep the control surfaces dry. Moisture can affect
proper functioning.
■ If the metal tray is bent or damaged, e.g. it has been hit by a
pan, this could cause it to function incorrectly.
The hotplates
Residual heat indicator
The hob has a residual heat indicator for each hotplate to show
those which are still hot. Avoid touching a hotplate that displays
this.
Even when switched off, the
œ/• light will remain on as long as
the hotplate remains hot.
If the pan is removed before the hotplate is turned off the
œ/•
indicators and the selected power level will appear alternately.
,QGLFDWRUVIRU
SRZHUOHYHO³É
IXQFWLRQDOLW\¯
UHVLGXDOKHDW¤
SRZHUERRVWIXQFWLRQ°
&RQWUROSDQHOIRU
PDLQVZLWFK
,QGLFDWRUV
IRU
WLPH
SURJUDP
IXQFWLRQ
&RQWUROGLVFIRU
VHOHFWLQJSRZHU
OHYHODQGWKHWLPH
SURJUDPIXQFWLRQ
&RQWUROSDQHOIRU
FOHDQLQJSURWHFWLRQIXQFWLRQ
DQGFKLOGSURRIORFN
&RQWUROSDQHOVIRU
°SRZHUERRVWIXQFWLRQ
WLPHSURJUDPIXQFWLRQ
ÄSODWHZDUPLQJ]RQH
Hotplate Switching on and off
$
Single hotplate Always use cookware of a suitable size.
æ
Hotplate This zone is switched on automatically when using cookware with a base the
same size as the outer zone.
q
Resistive plate-warming zone*
Press the Ù symbol.**
* Activating the hotplate: The corresponding indicator lights up.
** The residual heat warning light comes on.
Use only cookware suitable for induction cooking; see the section on suitable cookware.