Operation Manual

11
The Powerboost Function
The Powerboost function can be used to heat food more
quickly than using the power level
Š.
Restrictions when using
This function is available for all hotplates, provided that the
other zone of the same group is not operating (see image).
Otherwise, in the visual display of the selected hotplate
› and
Š will flash; then the power level will automatically set itself
to
Š.
To activate
1.Select the desired power level.
2.Press the ›symbol.
The function has been activated.
To deactivate
Select a new power level using the control disc. The
Powerboost function has been deactivated.
Note: In certain circumstances, the Powerboost function may
turn off automatically in order to protect the electronic
components inside the hob.
Time programming function
This function may be used in two different ways:
■ to automatically switch off a hotplate.
■ as a timer.
Turning off a hotplate automatically
Enter the cooking time for the required hotplate. The hotplate
turns off automatically once the time has elapsed.
How to program
1.Select the required power level.
2.Press the 0 symbol. The indicator x for the hotplates is
turned on. ‹‹ is displayed in the time program function
display.
3.Within 10 seconds, select the cooking time with the control
disc for the required hotplate.
After a few seconds, the cooking time begins to count down.
Once the time has elapsed
The hotplate switches off. An audible signal sounds and
‹‹
appears in the time program function display for 10 seconds.
The
x indicator lights up. Pressing the 0symbol turns off the
indicators and stops the signal.
Changing or cancelling the time
Press the
0 symbol several times until the required indicator
x lights up with greater intensity. Change the cooking time
with the control disc in the programming panel, or set to ‹‹.
Notes
■ If a cooking time has been programmed for several
hotplates, it can be set to display all the time values. To do
this, press the
0 symbol several times until the x indicator
for the required hotplate lights up with greater intensity.
■ Any cooking time can be programmed for up to 99 minutes.
Automatic timer
With this function you may select a cooking time for all
hotplates. Once a hotplate is switched on, the selected time will
begin to count down. The hotplate will automatically switch off
when the cooking time has elapsed.
Instructions on activating the timer are found in the chapter
entitled "Basic settings".
Note: The cooking time of a hotplate may be cancelled or
changed:
Press the
0 symbol several times until the required indicator
x lights up with greater intensity. Change the cooking time
with the control disc in the programming panel, or set to
‹‹.
*URXS









*URXS
*URXS
*URXS
 