[en] Instructions for installation and use EH6..QA1..
(+ 4$ Ú Table of contents alondustifr[e]Ice INSTALLATION INSTRUCTIONS............................................... 3 Assembly ............................................................................... 3 Important notes ..............................................................................4 Installing and connecting the hob - Figure 1/2/3/4/5 ...........4 Removing the hob .........................................................................
INSTALLATION INSTRUCTIONS Assembly [ $ % PLQ PLQ PLQ PLQ 5 PLQ PLQ & PLQ % & PLQ PLQ PLQ & PLQ PLQ $ PLQ PLQ PLQ 3
Important notes Safety in use is only guaranteed if the technical installation of the hob has been carried out correctly and in accordance with the installation instructions. The installation technician shall be liable for any damage caused as a result of incorrect installation. Only an authorised technician is able to connect the appliance. The guidelines set out by the local electricity provider must be observed. This is a class I appliance and should only be used with an earthed connection.
INSTRUCTION MANUAL Produktinfo Additional information on products, accessories, replacement parts and services can be found at www.siemens-home.com and in the online shop www.siemens-eshop.com : Safety precautions Please read this manual carefully. Please keep the instruction and installation manual as well as the appliance certificate in a safe place for later use or for subsequent owners. Check the appliance after removing it from the packaging.
A defective appliance may cause electric shock. Never switch on a defective appliance. Unplug the appliance from the mains or switch off the circuit breaker in the fuse box. Contact the after-sales service. ■ Cracks or fractures in the glass ceramic may cause electric shocks. Switch off the circuit breaker in the fuse box. Contact the after-sales service. Electromagnetic hazards! This appliance complies with safety and electromagnetic compatibility standards.
Protecting the environment Unpack the appliance and dispose of its packaging in such a way that no damage is caused to the environment. Environmentally-friendly disposal of waste products This appliance conforms to the Waste Electrical and Electronic Equipment Directive WEEE 2002/96/EC. This directive defines the framework for recycling used appliances within European territory ■ ■ ■ ■ Energy-saving advice ■ Always place the correct lid on cookware.
Empty pans or those with a thin base Do not heat empty pans, nor use pans with a thin base. The hob is equipped with an internal safety system. However, an empty pan may heat up so quickly that the "automatic switch off" function may not have time to react and the pan may reach very high temperatures. The base of the pan could melt and damage the glass on the hob. In this case, do not touch the pan and switch the hotplate off.
Switch off the hotplate Select the hotplate and then press the + or - symbol until the ‹ symbol appears. Note: If no pan has been placed on the induction hotplate, the selected power level flashes. After a certain time, the hotplate switches off. Cooking guidelines table The table below contains some examples. Use power level 9 to begin cooking. Power level Melting Power level Boiling, steaming, sautéing Rice (with a double amount of water) 2-3 Rice pudding 1.-2. Potatoes 4-5 Pasta 6-7* Soups 3.
Basic settings The device has several basic settings. These settings may be adapted to the user's individual needs. Accessing the basic settings Indicator Function 1. Turn on the hob. ™‚ Permanent childproof lock 2. Within the next 10 seconds, press the @ symbol for The hob should be turned off. 4 seconds. ‹ Deactivated.* ‚ Activated. ™ƒ Sound signals ‹ Confirmation beep and error signal deactivated. ‚ Only confirmation beep deactivated. ƒ All signals activated.* ™† Automatic time limitation.
Fixing malfunctions Malfunctions are commonly due to small details. Before calling the Technical Assistance Service, you should consider the following advice and warnings. Indicator Malfunction Solution none The electric power supply has been interrupted. Use other electrical appliances to check whether there has been a power cut. The appliance has not been correctly con- Check that the appliance has been connected correctly according to the connection diagram.
After-sales service Our after-sales service is there for you if your appliance should need to be repaired. We are committed fo find the best solution also in order to avoid an unnecessary call-out. E number and FD number: Please quote the E number (product number) and the FD number (production number) of your appliance when contacting the after-sales service. The rating plate bearing these numbers can be found on the appliance certificate.
Siemens-Electrogeräte GmbH Carl-Wery-Straße 34 81739 München Germany *9000732143* 9000732143 01 920508
