Operation Manual
7
Familiarise yourself with the appliance
These instructions for use are applicable to other hobs. On
page 2 an overview of the models is provided, along with
information on measurements.
The control panel
Control surfaces
Pressing a symbol activates its corresponding function.
Notes
■ The settings will not change if several symbols are pressed at
the same time. This enables the programming zone to be
cleaned when food is spilt.
■ Always keep the control surfaces dry. Moisture can affect
proper functioning.
Hotplates
Residual heat indicator
The hob has a residual heat indicator for each hotplate to show
those which are still hot. Avoid touching a hotplate that displays
this.
Even when switched off, the
œ/• light will remain on as long as
the hotplate remains hot.
If the pan is removed before the hotplate is turned off the
œ/•
indicators and the selected power level will appear alternately.
,QGLFDWLRQVIRU
SRZHUOHYHO³É
IXQFWLRQDOLW\¯
UHVLGXDOKHDW¤
SRZHUERRVWIXQFWLRQ°
&RQWUROSDQHOVIRU
PDLQVZLWFK
FOHDQLQJSURWHFWLRQ
IXQFWLRQDQG
FKLOGSURRIORFN
WLPHSURJUDP
IXQFWLRQ
3URJUDPPLQJSDQHOIRU
SRZHUOHYHOVHOHFWLRQ
DQGWKHWLPHSURJUDP
IXQFWLRQ
&RQWUROSDQHOV
IRU
VHOHFWLQJ
WKHKRWSODWH
&RQWUROSDQHOIRU
ÄSODWHZDUPLQJ]RQH
Hotplate Turning on and off
$
Single hotplate Use a correctly sized pan
æ
Broiler The broiler turns on automatically when a pan large enough to reach its outer
edges is placed upon it.
q
Resistive plate-warming zone
To activate: press the
Ù symbol and‚ appears in the display.
To deactivate: press the
Ù symbol again and ‹appears in the display.
* The residual heat indicator lights up.
Only use pans suitable for induction cooking, see the "Appropriate cookware" section.