Operation Manual

10
Childproof lock
The hob can be protected against being accidentally turned on,
to ensure that children do not switch on the hotplates.
Activating and deactivating the childproof
lock
The hob should be turned off.
To activate: press the symbol
‚/$for approximately
4 seconds. The indicator next to the symbol
‚/$ lights up for
10 seconds. The hob is locked.
To deactivate: press the symbol
‚/$ for approximately
4 seconds. The lock is now deactivated.
Childproof lock
With this function, the childproof lock automatically activates
when a hob is switched off.
Activating and deactivating
All of the relevant information on the automatic childproof lock
connection can be found in the Basic settings chapter.
Powerboost function
The Powerboost function can be used to heat large amounts of
water more quickly than the power level
Š.
Restrictions when using
This function is available for all hotplates, provided that the
other zone of the same group is not operating (see image).
Otherwise, in the visual display of the selected hotplate
›
and
Š will flash; then the power level will automatically set itself
to
Š.
To activate
1. Select a hotplate.
2. Press the › symbol.
The
› indicator lights up.
The function should be activated.
To deactivate
1. Select a hotplate.
2. Press the › symbol.
The
› indicator will no longer appear and the hotplate will
return to the power level
Š.
The function will be deactivated.
Note: In certain circumstances, the Powerboost function may
turn off automatically in order to protect the electronic
components inside the hob.
Time programming function
This function may be used in two different ways:
■ to automatically switch off a hotplate.
■ as a timer.
Turning off a hotplate automatically
The hotplate turns off automatically once the selected time has
elapsed.
Program the cooking time.
The hob must be switched on:
1. Select the desired hotplate and power level.
2. Press the 0 symbol. The x indicator on the hotplate lights
up.
‹‹ lights up in the time program function display.
3. Within the next 10 seconds, select the desired cooking time
in the programming zone. The possible default setting is,
from left to right: 1, 2, 3, etc., up to 10 minutes.
After a few seconds, the cooking time begins to elapse.
Note: The same cooking time can be automatically
programmed for the all the hotplates. The programmed time
passes independently for each of the hotplates.
The Basic settings chapter provides information on
automatically programming the cooking time.




*URXS
*URXS
 