Technical data

Appendix
11.2 Availability of hardware components
Function Manual
Function Manual, 06/2012, 6SL3097-4AB10-0BP4
727
In conjunction with the Control Unit, Version 4.4 of SINAMICS S110 supports the following
new functions:
No. SW function
1 Safety Integrated functions
• SDI (Safe Direction) for synchronous motors with encoder
2 Communication
• PROFINET address can be written via parameter (e.g. when completely generating the
project offline)
• Shared device for SINAMICS S PROFINET modules: CU305 PN
11.2 Availability of hardware components
Table 11- 1 Hardware components available as of 01.2011
No. HW component Order number Version Revisions
1 CU305 PN 4.4 new
2 IOP for CU305 Release of IOP is scheduled for
approximately June 2011
4.4 –