Technical data

Basic information about the drive system
10.3 Working with the memory card
Function Manual
Function Manual, 06/2012, 6SL3097-4AB10-0BP4
707
10.3.3 Replacing the device
A CU305 has failed. You want to replace the device but retain the firmware version. You
receive a new CU305 with the firmware version currently on release at the time of delivery.
To replace a device, proceed as follows:
No
Yes
No
Firmware version
+ parameter backup
both on own
memory
card
Firmware version
on memory card =
firmware version
on CU305
Insert memory card with
firmware into
CU305
Insert memory card with
parameter backup
into CU305
Insert memory card with
firmware into
CU305
Caution:
Any existing parameter backup on CU305
will be overwritten if
setting is 0!
Switch SINAMICS S110
off and on
again
Switch SINAMICS S110
off and on
again
Switch SINAMICS S110
off and on
again
Yes
Firmware is
copied from memory
card
to CU305
Parameter backup
with index 0 is
copied from the
memory card
to CU305
Firmware is
copied from memory
card
to CU305
Log off and remove memory
card with firmware and
insert card with
parameter
backup into
CU305
Switch SINAMICS S110
off and on
again
Parameter backup
with index 0 is
copied from the
memory card
to CU305
Copy parameter
backup to CU305:
See section 10.3.1
Marginal note "Series
commissioning
(copy parameter set)"
Log memory card
off (p9400 = 2)
and remove it
from CU305
Log memory card
off (p9400 = 2)
and remove it
from CU305
Log memory card
off (p9400 = 2)
and remove it
from CU305
Figure 10-7 Replacing the device