Technical data

Communication
9.3 Communication via PROFIBUS DP
Function Manual
650 Function Manual, 06/2012, 6SL3097-4AB10-0BP4
Procedure
1. In the overview for the PROFIBUS telegram, you can access the telegram portions of the
drive objects, here SERVO_01. Select the telegram type "Free telegram configuration
with BICO" for the configuration.
2. Enter the telegram lengths for the input data and output data according to the settings in
HW Config. For slave-to-slave communication links, the input data consists of the
telegram portion of the master and the slave-to-slave communication data.
3. Then, in the telegram selection, set the telegram portion to the "Standard telegram" (in
the example: Standard telegram 2), which results in a split display of the telegram types
(standard telegram + telegram extension). The telegram extension represents the
telegram portion of slave-to-slave communication.
Figure 9-36 Display of the telegram extension
By selecting the item "Communication → PROFIBUS" for the drive object "SERVO_01" in the
project navigator, you get the structure of the PROFIBUS telegram in the receive and send
direction.
The telegram extension from PZD5 is the portion for slave-to-slave communication.