Technical data

Communication
9.2 Communication according to PROFIdrive
Function Manual
602 Function Manual, 06/2012, 6SL3097-4AB10-0BP4
A_DIGITAL (digital outputs)
This process data can be used to control the Control Unit outputs.
See function diagram [2497]
Table 9- 28 Description of A_DIGITAL (digital outputs)
Bit Meaning Remarks Parameter
0 Digital input/output 8
(DI/DO 8)
– DI/DO 8 on the Control Unit must be parameterized as an output
(p0728.8 = 1).
BI: p0738
1 Digital input/output 9
(DI/DO 9)
– DI/DO 9 on the Control Unit must be parameterized as an output
(p0728.9 = 1).
BI: p0739
2 Digital input/output 10
(DI/DO 10)
– DI/DO 10 on the Control Unit must be parameterized as an output
(p0728.10 = 1).
BI: p0740
3 Digital input/output 11
(DI/DO 11)
– DI/DO 11 on the Control Unit must be parameterized as an output
(p0728.11 = 1).
BI: p0741
4...15 Reserved – – –
Note:
The bidirectional digital inputs/outputs (DI/DO) can be connected as either an input or an output (see also transmit signal
E_DIGITAL).