Technical data

Commissioning with PROFIBUS

3.3 Basic Operator Panel 20 (BOP20)

Function Manual

Function Manual, 06/2012, 6SL3097-4AB10-0BP4

● Tools → Set PG/PC interface... → Properties

Activate/deactivate "PG/PC is the only master on the bus".

Note

• Baud rate

Switching STARTER to a working PROFIBUS:

STARTER automatically detects the baud rate used by SINAMICS for the PROFIBUS.

Switching the STARTER for commissioning:

The Control Unit automatically detects the baud rate set in STARTER.

• PROFIBUS addresses

The PROFIBUS addresses for the individual drive units must be specified in the

project and must match the address settings on the devices.

3.3 Basic Operator Panel 20 (BOP20)

Brief description

The Basic Operator Panel 20 (BOP20) is a basic operator panel with six keys and a display

unit with background lighting. The BOP20 can be plugged onto the SINAMICS Control Unit

and operated.

The following functions are possible using BOP20

● Entering parameters

● Display of operating modes, parameters, alarms and faults

● Powering-up/powering-down while commissioning

Further information: See 'Parameterizing using the BOP20 (Basic Operator Panel 20)'

chapter