Technical data

Safety Integrated Functions

8.9 Acceptance test and acceptance report

Function Manual

Function Manual, 06/2012, 6SL3097-4AB10-0BP4

515

No. Description Status

• C01700, C30700 (STOP A initiated)

Analyze trace:

• As soon as r9713[0] leaves the SDI tolerance window, a Safety message becomes

active (r9722.7 = 0).

• STOP B is initiated as a consequence (with subsequent stop STOP A)

5. Save/print the trace and add it to the acceptance report (refer to the example below)

Deselect SDI and safely acknowledge Safety messages

• No Safety faults, alarms and messages (r0945[0...7], r2122[0...7], r9747[0...7])

• r0046.0 = 1 (drive in "switch-on inhibited" state)

Acknowledge switch-on inhibit and run the drive

• Check whether the drive is moving

7. Repeat points 1 to 6 for the opposite direction.

Example trace: SDI (with encoder) with STOP B

6',SRVLWLYHDFWLYH

,QWHUQDOHYHQW

66DFWLYH

3XOVHHQDEOH

'HVHOHFW6',

SRVLWLYH

'ULYHBU>@6,PRWLRQGLDJQRVWLFVSRVLWLRQDFWXDOYDOXHORDGVLGHORDGVLGHDFWXDOYDOXHRQWKH&RQWURO8QLW

%LWWUDFNV

Figure 8-49 Example trace: SDI (with encoder) with STOP B