Technical data

Safety Integrated Functions
8.9 Acceptance test and acceptance report
Function Manual
Function Manual, 06/2012, 6SL3097-4AB10-0BP4
469
8.9.4 Acceptance reports
8.9.4.1 Plant description - Documentation part 1
Table 8- 22 Machine description and overview diagram
Designation
Type
Serial number
Manufacturer
End customer
Electrical drives
Other drives
Overview diagram of machine
Table 8- 23 Values of relevant parameters
Versions of the firmware and of Safety Integrated
Component DO number Firmware version SI version
Parameters
Control Unit
r0018 = r9590 =
r9770 =
Note: Parameters can be found in
the drive.
DO number Firmware version SI version
Parameter
Sensor Module
r0148 = r9890 =
Monitoring clock cycles of Safety Integrated
DO number SI monitoring clock cycle
(Control Unit)
SI monitoring clock cycle (processor
2)
Basic Functions r9780 = r9880 =
DO number SI Motion monitoring clock cycle
(processor 1)
SI Motion monitoring clock cycle
(processor 2)
Extended
Functions
p9500 = p9300 =