Technical data

Safety Integrated Functions
8.9 Acceptance test and acceptance report
Function Manual
466 Function Manual, 06/2012, 6SL3097-4AB10-0BP4
D) Functional testing of actual value acquisition
1. General testing of actual value acquisition
– After exchanging a hardware component, initial activation and brief operation in both
directions.
WARNING
During this process, all personnel must keep out of the danger area.
2. Test of failsafe actual value acquisition
– Only necessary if Extended Functions are used
– If the motion monitoring functions are activated (e.g. SLS or SSM with hysteresis),
briefly operate the drive in both directions.
E) Conclusion of the report
Report of the commissioning status tested and countersignatures
1. Extension of checksums (for each drive)
2. Countersignature