Technical data

Commissioning preparations for PROFIBUS
2.4 Powering-up/powering-down the drive system
Function Manual
44 Function Manual, 06/2012, 6SL3097-4AB10-0BP4
Control and status messages
Table 2- 3 Power-on/power-off control
Signal name Internal control word Binector input PROFdrive/Siemens
telegram 1 ... 111
0 = OFF1 STWA.00
STWAE.00
p0840 ON/OFF1 STW1.0
0 = OFF2 STWA.01
STWAE.01
p0844 1. OFF2
p0845 2. OFF2
STW1.1
0 = OFF3 STWA.02 p0848 1. OFF3
p0849 2. OFF3
STW1.2
Enable operation STWA.03
STWAE.03
p0852 Enable operation STW1.3
Table 2- 4 Switch-in/switch-out status signal
Signal name Internal status word Parameter PROFdrive/Siemens
telegram 1 ... 111
Ready to start ZSWA.00
ZSWAE.00
r0899.0 ZSW1.0
Ready for operation ZSWA.01
ZSWAE.01
r0899.1 ZSW1.1
Operation enabled ZSWA.02
ZSWAE.02
r0899.2 ZSW1.2
Switching on inhibited ZSWA.06
ZSWAE.06
r0899.6 ZSW1.6
Pulses enabled ZSWA.11 r0899.11 ZSW1.11
1)
1)
Only Siemens telegrams 102 and 103
Function diagrams (see SINAMICS S110 List Manual)
● 2610 Sequence control - sequencer
● 2634 Missing enable signals, line contactor control