Technical data

Drive functions
7.3 Function modules
Function Manual
Function Manual, 06/2012, 6SL3097-4AB10-0BP4
311
7.3.8.19 BSW (binary change-over switch)
Brief description
This function block switches one of two binary input variables (BOOL type) to the output.
Mode of operation
If input I = 0, I0 is switched to output Q.
If input I = 1, I1 is switched to output Q.
7.3.8.20 NSW (numeric change-over switch)
Brief description
This function block switches one of two numeric input variables (REAL type) to the output.
Mode of operation
If input I = 0, X0 is switched to output Y.
If input I = 1, X1 is switched to output Y.