Technical data

Function Manual

Function Manual, 06/2012, 6SL3097-4AB10-0BP4

General information for commissioning

1.1 Explanations regarding the STARTER user interface

Use STARTER to create your sample project. The different areas of the user interface are

used for different configuration tasks (refer to diagram below):

● Project navigator (area

①): this area displays the elements and objects that can be

added to your project.

● Working area (area

②): you create the project in this area:

– When you are configuring the drive, this area contains the Wizards that help you

configure the drive objects.

– When you configure, for example, the parameters for the speed setpoint filter

– When you call up the expert list, the system displays a list of all the parameters that

you can view or change.

● Detail view (area

③): This area provides detailed information on faults and warnings, for

example.

Figure 1-1 The different areas of the STARTER user interface