Technical data
Diagnostics
5.2 Diagnostics via STARTER
Function Manual
Function Manual, 06/2012, 6SL3097-4AB10-0BP4
99
Parameterization
The "Measurement function" parameter screen is selected via the following icon in the
toolbar of the STARTER commissioning tool.
Figure 5-8 STARTER icon for "Measuring function"
5.2.4 Measuring sockets
Description
The measuring sockets are used to output analog signals. Any interconnectable signal can
be output to any measuring socket on the Control Unit.
CAUTION
The measuring sockets should be used for commissioning and servicing purposes only.
The measurements may only be carried out by properly trained specialist personnel.
0HDVXULQJVRFNHWVPP
7PHDVXULQJVRFNHW
7PHDVXULQJVRFNHW
*1'UHIHUHQFH
0HDVXULQJVLJQDO
IRUGHIDXOWVHWWLQJ
RIVFDOLQJ
9
9
9
RIWKHPHDVXULQJVLJQDO
Figure 5-9 Arrangement of the measuring sockets on the Control Unit CU305